ALTI hyperbaric Chamber

Alti Equipment Expedition Chamber

To purchase, visit www.AltiEquipment.com

Hyperbaric chamber made by MROZY. Suitable for repeated use on expeditions.

Technical Specifications

• Dimensions: 225 cm (L) × 75 cm (W) × 55 cm (H)
• Weight: 1000 g (chamber only)
• Internal Volume: approx. 600 L
• Fabric: High-tenacity nylon coated with thermoplastic polyurethane (TPU)
• Closure: Airtight zipper
• Attachment loops: 10 mm wide non-fraying polyamide webbing straps
• Window: Clear TPU film

Usage & Performance

• Compatible with standard pumps (recommended: Flextail Max 3 or standard foot pump).
• Tested to 15kPa = ~2000m altitude descent.
• Recommended operational pressure: 10kPa = 1500m descent.
• Manual pump required above 5kPa.
• Electric inflation to 5kPa (~750m descent): ~1:30 mins.
• Manual inflation 5kPa → 10kPa: ~2:00 mins.
• Internally and zipper purgeable.
• Air refresh: Release zip for ~1:30 mins every 30 mins max.
• Clear window allows touchscreen use.
• Clip attachment point (for securing only, not suspension).
• Material: proprietary TPU.

Instructions

• Find a flat, safe area free from sharp objects and unroll the chamber.
• Place padding if available (e.g., sleeping mat).
• Lay chamber on top of padding and attach the pump.
• Secure chamber to prevent sliding or falling.
• Recommended items inside: pee bottle, phone, altimeter watch, water, warm clothing, emergency tools.
• Put person and items inside, zip up, and begin steady pumping.
• Use a measuring device (altimeter or pressure gauge) to monitor pressure.
• Maintain max pressure: 10kPa. Continuous pumping allowed 30 mins max before purging.
• To purge oxygen: slightly open zipper for ~1:30 mins, then reseal.
• To deflate: slowly reduce pressure, use relief valve, or open zipper gradually.
• Ensure communication and monitor the person at all times.
• After use, remove contents, turn bag inside out, and hang to dry.

To purchase, visit www.AltiEquipment.com