Domowa armatka śnieżna

Home Snowmaker

The snowmaker allows you to produce real snow at temperatures from -2.5C down.

The snowmaker snows an area of ​​~ 6m x 2.5m

You can make snow on a sleigh hill, make your guests' stay at the guesthouse more pleasant, build a home snow park or simply show your neighbors that since it's winter, there should be snow.

This is a suitably constructed set of nozzles with selected sizes and at appropriate distances, separated by a valve. The installation is mounted on a stable, adjustable frame (the head angle changes).

The snowmaker should be connected to a pressure washer and a compressor (not included). These devices can be purchased, for example, in DIY stores or on online auctions.

The snowmake is equipped with standard quick connectors. Due to the lack of standards from manufacturers of washers, it may be necessary to purchase additional connectors.

At the right temperature and device properties, the snowmaker will produce about 10 cm of snow in a 5 m x 5 m square in 2 hours, i.e. about 18 cm of snow in the area of ​​the snow gun's operation, i.e. 6 m x 2.5 m (assuming the use of a pressure washer with a capacity of 477 litres/h).

With the above assumptions, the snow gun produces about 2.6 m3 of snow in 2 hours.

Water and electricity consumption during snowmaking depends on the devices used - pressure washer and compressor.

How does it all work?

What do you need to start making snow?
The pressure washer should have a capacity of approximately 477 l/h (i.e. 7.95
l/min) (for washers with lower capacities, one of the nozzles can be removed and the hole plugged with a nipple).
The compressor should provide a pressure of at least 6.2 bar at an air flow of at least 141.6 l/min
A pressure washer and compressor must be connected to the snowmaker.
How does it all work?
At temperatures of -2.5C you can start making snow (see the table below)

*order fulfillment time 2 weeks